WARNING: AVOID INJURY. Read and
understand the entire Safety section before
proceeding.
WARNING: Dropping or tipping over boxed
unit could result in personal injury or damage
to unit.
PACKAGE CONTENTS
921002, 003, 004
2
4
1. Sno-Thro Unit
2. Discharge Chute
Figure 4
3
1
3. Chute Rod
4. Literature Pack with
Extra Shear Bolts
OS7019
ASSEMBLY
921001
2
4
1. Sno-Thro Unit
2. Discharge Chute
ASSEMBLY
Tools Required:
• Pliers
• Open-End Wrenches: 3/8, 7/16, 1/2,
9/16 in. and/or Adjustable Wrench
• Tire Gauge
Unfold Handlebar (Figure 6, 7)
1. Remove the lower and loosen the upper wing
knobs on the handlebar assembly.
2. Loosen the wing nuts on the shift rod.
3. Put the speed selector lever in the first forward
position (921002, 003, 004) or in the sixth forward
position (921001).
4. Rotate the handlebars into operating position.
5. Install and tighten all wing knobs and wing nuts
on the handlebar assembly and shift rod.
GB - 7
3
1
3. Chute Rod
4. Literature Pack with
Extra Shear Bolts
Figure 5
OS7021