Timer Priority - JVC GVT0001-002A Instructions Manual

Timer Priority

Since each timer can be set independently, you may wonder what happens if the settings overlap.
Here are the priorities for each timer:
Example 1
REC Timer
SLEEP Timer
Example 2
REC Timer
DAILY Timer
PM9:30
The REC Timer always has priority. This means that:
• If another timer is set to come on during a time when the REC Timer is operating, the other
timer just won't come on at all, so you will always get the entire program on tape.
• If the REC Timer is set to come on while another timer is operating, the other timer will shut
off 10 seconds before the REC Timer is set to turn on, and the REC Timer will then take
over.
The SLEEP Timer has the least priority. This means that if the SLEEP Timer is set while the
DAILY Timer is operating, the DAILY Timer settings are cancelled. However, if the DAILY
Timer is set to come while the SLEEP Timer is operating, the SLEEP Timer setting will be
cancelled and the Unit will use the settings from the DAILY Timer.
Setting
OFF
ON
OFF
PM10:00 PM10:30 PM11:00
Setting
ON OFF
ON
PM10:00 PM10:30 PM11:00
ON
PM10:00
The REC Timer has priority.
ON
OFF
PM9:30
The REC Timer has priority.
Operation
OFF
PM10:30
Operation
OFF
PM10:30
35