Connecting The Fm Antenna; Connecting The Am Antenna - JVC GVT0001-002A Instructions Manual

CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Connecting the FM Antenna

Using the Supplied Feeder Antenna
FM
AM
LOOP
Using an FM 75-Ohm Antenna Cable (Not Supplied)
If reception is poor, connect the outside antenna.
FM
AM
LOOP
Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside antenna),
disconnect the supplied FM Wire Antenna.
CAUTION: To avoid noise, keep antennas away from metallic parts of the CA-D622T, connecting cord and the AC power cord.

Connecting the AM Antenna

GND
AM
LOOP
AM
EXT
1 2
4
ANTENNA
FM
(75 )
GND
GND
AM
EXT
ANTENNA
FM
(75 )
GND
GND
AM
EXT
AM antenna wire (Not supplied)
Note: Even when connecting
an outside AM antenna,
keep the indoor AM loop
connected.
AM Loop Antenna
3
FM Wire Antenna
Extend the supplied FM Wire Antenna
horizontally.
Outside FM antenna wire
2
20 mm
10 mm
1 3
If reception is poor, connect the outside antenna.
Turn the loop until you
have the best reception.
Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.