Ford 1999 Windstar Owner's Manual page 170

Roadside emergencies
The fuse holder is designed to allow you to pull the fuse (#6) from the
fuse panel circuit without having to completely remove it from the fuse
panel. The fuse and fuse holder will remain in the fuse panel.
If the fuse (#6) must be replaced, the fuse and fuse holder can be
removed by pulling it completely out from the fuse panel cover.
With the fuse (#6) removed, the following systems will not be functional:
• radio
• power sliding door(s) – (if equipped)
• keyless entry system– (if equipped)
When the pull fuse is reinstalled, the following features will need to be
reset.
• radio pre-sets
• power sliding door(s) – (if equipped)
Please refer to the Using Your Audio System and Power Sliding Door
sections in the Controls and Features chapter for instructions to reset
these features.
170
RELAY 1 RELAY 2
RELAY 4 RELAY 5
FUSE 1 FUSE 2 FUSE 3 FUSE 4
FUSE 7 FUSE 8 FUSE 9 FUSE 10
FUSE 12 FUSE 13 FUSE 14 FUSE 15
FUSE 18 FUSE 19 FUSE 20 FUSE 21
FUSE 24 FUSE 25 FUSE 26 FUSE 27
RELAY 3
RELAY 6
FUSE 5
FUSE 6
FUSE 11
FUSE 16 FUSE 17
FUSE 22 FUSE 23
FUSE 28 FUSE 29