Auto Standby; Sleep Timer; Tray Lock - JVC EX-D11 Instructions Manual

Setting the Various Timer (continued)

Auto Standby

If there is no operation for 3 minutes while the disc is
stopped, the power will be automatically turned off.
Press A.STANDBY during playback
or while the disc is stopped, or no
disc is loaded ("NO DISC" appears).
The A.STANDBY indicator lights on the display
window on the main unit.
When a stopped state is entered (after playback is
finished, for example), the A.STANDBY indicator
starts blinking.
This means that the power will be turned off
automatically if there is no operation for 3 minutes.
And 10 seconds before the power is turned off,
"A.STANDBY" starts flashing.
Releasing Auto Standby
Press A.STANDBY.
"A.STANDBY" will be turned off on the display
window on the main unit.
NOTE
When the source is FM, AM, USB or AUX, Auto
Standby does not work.
36

Sleep Timer

When the time you specify elapses, the system will
be turned off by itself.
Press SLEEP.
Each time you press the button, the time indicated
on the display window on the main unit changes (in
minutes).
Changing the time
Reselect the time by pressing SLEEP repeatedly.
Confirming the time
Press SLEEP once while Sleep Timer is set.
Releasing
Press SLEEP repeatedly until "SLEEP OFF"
appears.
NOTE
Sleep Timer will also be released when the power is
turned off.

Tray Lock

You can lock the disc tray to prevent the disc from
being ejected.
Setting
While the system is turned off, press 0 (Open/
Close) with 7 (Stop) on the main unit held.
"LOCKED" appears on the display window on the
main unit.
Releasing
Carry out the same operations as those for setting.
"UNLOCKED" appears on the display window on
the main unit.