Redialing Numbers; Ending Calls; Using Headsets - Polycom VVX 400 User Manual

Polycom VVX 400 and 410 Business Media Phones User Guide

Redialing Numbers

To dial the last number you called, press the right arrow key for the Placed Calls list. The first number in
the list is the last call you placed.
To redial a number:
» From the Placed Calls list (shown next), press Dial.
Use the up and down arrow keys to select the other previously placed calls.

Ending Calls

You can end an active call in the following ways:
 Place the handset on the cradle.
 From Lines or Calls view, press End Call.
 In Calls view, highlight the call before you press End Call.
To end a held call:
» From Calls view, select the held call, and press Resume > End Call.

Using Headsets

You can connect an analog headset to your phone. If an analog headset is connected and in use,
glows green.
If you use a headset, you can set up your phone so that all calls use your headset
Memory Mode). If you use a headset that supports electronic hookswitch (EHS), you can press the
hookswitch button to place, answer, and end calls. In addition, you can to mute calls and control volume
from your headset.
For information about how to connect a headset to your phone, see the Quick Start Guide for your phone,
which is available on the Polycom
For information about your headset's features and how to sync your headset with your phone, see your
headset's documentation.
Polycom, Inc.
web page.
Business Media Phones
Version 5.0.0
(see Enabling Headset
28