To Play A Disc; To Change Discs While Playing; To Select A Track - JVC CA-TD77R Instructions Manual

To Play a Disc ———————————————————————
This function plays the disc in the Unit continuously, and lights the "CONTINUE" indicator.
1. Prepare the discs.
DISC 1
DISC 3
2. Press the DISC (1-3) button on the Unit or the Remote Control you
DISC 2
DISC 1
To use Continuous Play from the first track of the disc selected by the disc marker, you do not need to
press a DISC (1-3) button, just press the CD or 3 button (or CD or 3
PTY SEARCH
Control).
*
Playing order of discs
o
o
o
Note: If there is no CD in the disc tray for the DISC (1-3) button you pressed, the message "NO DISC"
appears on the display and the tray for that disc is automatically moved to the top and the Main Tray
opens. If there is no disc in the disc tray for the selected disc number when the 3 or CD button (or the CD
or 3
To stop playing the disc, press the 7 button (press the 7
when using the Remote Control).
To stop play and remove the disc, press the 0 button for the disc being played or press the ALL CD
EJECT button.
To pause, press the 3 button. The Disc display will blink. (The Pause function cannot be used with the
3
To cancel pause, press the 3 button again or press the CD button (or the CD or 3
Remote Control). Play continues from the point where it was paused.
To Change Discs While Playing ——————————————
You can replace a CD in a tray not being used, while another CD is playing.
1. Press the 0 button of the tray not being used.
2. Replace the disc in the tray.
3. Press the same 0 button again.
To Select a Track —————————————————————
Using the Unit
Press the cursor key to the right or left (4
o
o
Using the Remote Control
Press the
PTY SELECT PTY SELECT
– +
o
o
want to play.
The first track of the selected disc will begin playing.
When the selected disc finishes playing, the next disc will begin playing automatically.
When the last disc has finished playing, the Unit will stop automatically.
The 3
button on the Remote Control can be used to control the CD Player when the Remote
Control is in CD mode.
When playback starts from DISC 1, the playing order is DISC 1 = DISC 2 = DISC 3. When DISC 3
has finished, the CD Player selects DISC 1 (the disc marker is on) and stops.
When playback starts from DISC 2, the playing order is DISC 2 = DISC 3 = DISC 1. When DISC 1
has finished, the CD Player selects DISC 2 (the disc marker is on) and stops.
When playback starts from DISC 3, the playing order is DISC 3 = DISC 1 = DISC 2. When DISC 2
has finished, the CD Player selects DISC 3 (the disc marker is on) and stops.
• If any of the disc trays are empty, the CD Player skips that disc tray and continues through the
remaining disc trays in the order shown above.
button on the Remote Control) is pressed, playback begins from the next disc.
button on the Remote Control.)
The disc tray you selected is set to the top and the Main Tray opens.
The Main Tray closes.
Set the tracks by pressing the 4
¢ cursor key moves to the next track.
• Pressing the
Pressing the 4
• cursor key moves to the previous track. (Moves to the beginning of the track
during playing a track.)
Pressing down either of these cursor keys scans the tracks continuously until the key is released.
4 1 or ¡ ¢
Each time you briefly press and release the
one.
Press and release the ¡ ¢
•
4 1 button to go back one track at a time. (Moves to the beginning
• Press and release the
of the track during playing a track.)
4 1 or ¡ ¢
Holding down the
button after pressing the CD button
or
¢ cursor key to move between tracks.
or
button after pressing the CD button.
4 1 or ¡ ¢
button to go ahead one track at a time.
button allows you to change tracks continuously.
* button on the Remote
button on the
¢).
button, the track changes by
29