J355-En.indd 7 J355-En.indd - York RVHC 09-12DS Installation & Owner's Manual

OUTDOOR UNIT PICTURES
RVJC 07-12
285
PARTS INSTALLATION
Number
Installation plate
1
2 Clip anchor
3 Self-tapping screw A ST3.9X25
Liquid side ø 6.35
Connecting
4 pipe
Gas side
assembly
5 Remote controller
6 Self-tapping screw B ST3.9X10
Remote controller holder
7
8 Seal
9 Drain joint
NOTES
Except the above parts provided, the other parts needed
during installation you must purchase.
CAUTIONS
• Ensure that the space around the left and right of the
indoor unit is more than 12cm.
The indoor unit should be installed allowing a minimum
clearance of 15cm from the ceiling.
• Use a stud fi nder to locate studs to prevent unnecessary
damage to the wall.
• A minimum pipe run of 3 metres is required to minimise
vibration & excessive noise.
• The indoor unit should be installed on the wall at a height
of 2.3 metres or more from the fl oor.
• A, B and C directions should be free from obstructions.
NOTES
• This illustration is for explanation purposes only.
• Copper lines must be insulated independently.
J355-EN.indd 7 J355-EN.indd 7
750
62
530 110
Name of part Q'ty
Parts you
ø 9.53 (<12000Btu/h model) must
purchase
ø 12.7 (f12000Btu/h model)
RVJC 18
843
301.5
141.5 560.1
1
8
8
1
2
1
1
1
5
Remote Controller
A
B
313
Self-tapping screw B
ST3.9X10
4
7
6
Remote Controller
holder
Loop the
connective
cable.
C
7
ENGLISH
1/12/07 3:20:57 PM 1/12/07 3:20:57 PM
EN