Adjusting The Volume; Listening To The Radio - JVC CA-DXU10 Instructions Manual

Adjusting the Volume

The volume level can be adjusted in 32 steps (VOLUME
MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX).
Remote control:
AUDIO
VOL
To drop the volume in a moment
FADE
MUTING
To restore the volume, press again or
adjust the volume level.

Listening to the Radio

To select the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other
countries use 10 kHz spacing.
1
Select "TUNER-AM," then turn off (standby) the
System.
TUNER FM
TUNER AM
2
Select the AM tuner interval spacing.
To select 9 kHz:
(while holding...)
To select 10 kHz:
(while holding...)
To select the band (FM/AM)
FM/AM/AUX
TUNER FM
9
Main unit:
Remote
ONLY
INFO
Main Unit
ONLY
TUNER AM
AUX
To tune in to a station
While FM or AM is selected...
1
sec.
SLOW
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency search stops.
• When you repeatedly press the button, the frequency
changes step by step.
To manually stop the searching, press either button.
If the FM reception is poor
The MONO indicator lights on the
FM/PLAY MODE
display. Reception will improve though
stereo effect is lost—monaural reception
mode.
To restore the stereo effect, press the
button again (the MONO indicator goes
off).
Remote
ONLY
To preset stations
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
• You can also store the monaural reception mode for FM
preset stations if selected.
2
Activate the preset number entry mode.
ENTER
/SET
• Finish the following process while the indication on the
display is flashing.
• To cancel the operation during procedure, press
CANCEL.
3
Select a preset number for the station you store.
• To select a number, see "How to
1 2 3
select a number" on page 8.
4 5 6
• You can also use ¢/4 buttons.
7 8 9
10 0 10
Increases the frequency.
Decreases the frequency.
Remote
ONLY