Registering The Telephone; Subscribing The Handset To A Dect System - Alcatel-Lucent OmniPCX Office 500 User Manual

Registering the telephone

6
6.1

Subscribing the handset to a DECT system

You must subscribe the handset to at least one DECT system before you can use
the handset to make a call.
You have to contact the system administrator to configure
the company directory access.
The handset can operate with a maximum of four DECT systems.
When the handset is not yet subscribed to a system, the following message
appears on the display screen: Register.
Before you subscribe to a DECT system, obtain the following information from
your system administrator:
PARK code: Use a PARK code system ID only if more than one DECT system
•
overlaps in your location.
DECT system name: The name of the system to which you subscribe. After you
•
enter the system name, it appears on the idle display.
Phone number: The local phone number assigned to your DECT handset.
•
When entering text, such as the system name, you can switch to the upper case
mode and the numeric keypad by pressing successively on the # key.
To subscribe your handset to a DECT system, perform the following
steps.
Menu
Select
Register
Select
Ok
Select
If there is no more free slot, you have to replace a existing
system to add a new one.
Park code
Save
OR
Skip
Other
Access MENU
Access to the handset settings menu
Select the tab: Connectivity
Place sur cursor ( highlight): Register
Enter the PIN Code ( 0000 by default)
Select an empty slot or an existing system which will be replaced
Use a PARK code system ID if more than one DECT system
overlaps in your location. If only one DECT system is available, make
no entry, and press the Skip soft key.
If only one system is available
27