Switching On Your Telephone; Install A Bluetooth Equipment ( Appairing) - Alcatel-Lucent OmniPCX Office 500 User Manual

Battery charge
Recharge your telephone battery regularly. The telephone can be on or
off when recharging the battery. If the telephone is to remain unused or
out of its charger for several weeks, remove the battery and store it
separately.
Time and date are reseted when : you switch off the set, the battery is
empty or removed.
1.3

Switching on your telephone

Long press
CLR
Press on the same key ( long press) to switch off the handset.
1.4

Install a bluetooth equipment ( appairing)

Before using a Bluetooth device with your phone, you must install the
Bluetooth module in your phone .
For more information, contact your installer or administrator.
Install the Bluetooth module
You must be in
possession of the
Bluetooth module for
your phone
Battery fully charged ( 75% - 100%)
Battery half charged ( 33% - 75%)
Low battery ( 0% - 33%)
Battery completely discharged ( 0%)
• Press the switch on/off key ( long press).
• Wait a few seconds ( about 3s).
• Your telephone is switched on
• Turn off the handset
• Slip the lock to the
unlocked position
• Lift the battery module
8
• Insert the Bluetooth
module ( You should hear
a click when the module is
in place )
• Installing the battery in the
telephone
• Turn on the handset