KYMCO Downtown 200i Service Manual page 54

5. ENGINE REMOVAL/INSTALLATION
Remove the muffler.
Remove the rear fork mounting bolts (1)
attaching to the crankcase.
Torque: 3.5 kgf-m (35 N-m)
Remove the rear axle nut (2).
Torque: 12.0 kgf-m (120 N-m)
Remove two bolts (3) attaching to rear brake
hose clamps.
Remove two bolts (4) attaching to the rear
brake caliper.
Torque: 3.2 kgf-m (32 N-m)
Disconnect the alternator connector (5).
Disconnect the ignition pulse generator
connector (6).
Release the rubber cap and remove the
terminal screw (7) to disconnect the start
motor cable from the start motor.
Remove the bolt and engine ground cable.
5-3
DOWNTOWN 200i
(4) (3)
(2) (1)
(6) (5)
(7)