14.HANDLEBAR/FRONT WHEEL/FRONT BRAKE/
FRONT SHOCK ABSORBER/STEERING STEM
STEERING STEM
REMOVAL
Remove the steering handlebar.
Remove the front brake hose and speed wheel
sensor connector from the guide.
Hold the steering stem top cone race and
remove the steering stem lock nut by using
the special tool.
Special tool:
Lock nut wrench
Top Cone Race
Remove the top cone race and washer.
Remove the steering stem.
Be careful not to lose the steel balls (26
on top race and 19 on bottom race).
Special tool:
Lock nut wrench
14-15
Right
F00002
F00023
DOWNTOWN 200i
Lock Nut Wrench