Yamaha HTR-5750 Owner's Manual page 33

Notes
• Some 6.1-channel compatible discs do not have a signal (flag)
which this unit can automatically detect. When playing these
kinds of discs with 6.1-channel. select a decoder manually
(P1.11x Music. EX/ES or EX).
• 6.1-channel playback is not possible even It EX/ES is pressed in
the following cases:
— When "SURR LR" (see
page 46) or "SURR B" (see page 46)
is set to NONE.
When the source connected to the MULTI Cii INPUT jack is
being played.
— When the source being played does not contain surround left
and right channel signals.
— When a Dolby Digital KARAOKE source is being played.
— When "2ch Stereo" or "Direct Stereo" is selected.
• When the power of this unit is turned off, the input mode will be
reset to AUTO.
• When the DIS-ES decoder is applied to DTS 96/24 signals, you
cannot use the DTS 96/24 decoding feature.
• The Pro Logic II x decoder is not available when "SURR B" is
set to NONE (see page 46).
• Enjoying 2-channel software
Signals input froin 2-channel sources can also be played
back on multiple channels.
Press 00/DTS on the remote control to select the
decoder.
UCVDTS
You can select
from the following decoders depending on
the type of software you are playing and your personal
preference.
PRO LOGIC: SUP. STANDARD
Standard processing
for Dolby Surround sources.
PPAD LOGIC: SLR. ENHPNCED
CINEMA DSP enhanced processing for Dolby Surround
sources.
PRO LOGIC: I
Dolby Pro logic II/II' processing for movie software.
PRO LOAF_ I
Music*
Dolby Pro Logic hills processing for
music software.
PRO LOGIC Game'
Dolby Pro Logic II/11x processing for game software.
Hecift Cinema
DTS processing for movie software.
DTS Nes:6 Music_
DTS processing for music software.
" Use the PLII/P1.11x parameter to select the Pro Logic II or Pro
Logic Ilx decoders (see page 40).
Note
The Pro Logic Ilx decoder is not available when
"SURR B" is set
to
NONE (see page 46».
29