Ricoh M018 Service Manual page 202

Service Menu
Fax Maintenance
RX Settings
TX Settings
M018/M019
Silence (No tone) detection time (Rx mode : FAX/
TAD Only)
Silence After the line is connected via the external
Detection Time telephone, the machine can detect silence (no
tone) for the time length specified by this setting.
[30 sec (Default)]
CNG tone detection time ( RX mode : FAX / TEL,
FAX / TAD Only)
CNG Tone After the line is connected via the external
Detection Time telephone, the machine can detect a CNG signal
for the time length specified by this setting.
[5 Sec (Default)/ 10 Sec]
Number of CNG cycles to be detected
CNG Cycles This setting is only effective for FAX/TAD mode.
[1.5 Cycle (Default)/ 2.0 Cycle]
Determines the period when tones from the line
Tone Sound are monitored.
Monitoring [No Monitoring/ Up To Phase B (Default)/ All TX
Phases]
Pressing the Stop/Clear key can stop the current
Stop/Clear key receiving operation. Received data is lost.
[Not Functional (Default)/ Functional]
Sets the off-hook detection threshold.
Off-Hook Level
[10V (Default)/ 15V/ 20V/ 25V]
Sets the redial interval when Tx fails.
Redial Interval
[5 Min/ 6 Min]
Sets the number of redials when Tx fails.
Redialings
[2 times/ 3 Times/ 4 Times/ 5 Times]
4-10 SM Appendix