Ricoh M018 Service Manual page 198

Service Menu
Engine Maintenance
Init Engine
EEPROM
Model
Brand ID
LSU Adjustment
Trans. Belt Adjust
Fuser SC Detect
Color
Registration
Reset Transfer
Unit Life Counter
M018/M019
This clears all counters except "Full Color" and "Black and White" in
the total counter.
When you execute "Init Engine EEPROM", the engine EEPROM is
initialized.
Turn the machine power off/on after you change this setting.
Displays only
1: MF2b
2: M019
Displays the current model in a dropdown list.
Do not change this setting (Designed for Factory Use).
00* – 7F
Displays the current brand ID number.
Do not change this setting (Designed for Factory Use).
Character: alphanumeric "0-9", "a-f", "A-F", only
Input 160 bytes
valid data can be input.
setting.
Input length: 160 bytes
When you execute "Trans. Belt Adjust", the transfer belt adjustment is
done. This calibrates the motor speed to match the length of the new
transfer belt.
If On, the engine detects SC559. If Off, the engine
On/Off*
does not detect "Fusing SC Reset".
The engine will do color registration and density tuning automatically.
The machine will warm up automatically after this setting is changed.
Resets the transfer unit life counter.
4-6 SM Appendix