Sony SRW-5001 Operation Manual page 166

Menu List
Item number Item
605 TAPE TIMER
DISPLAY
606 TCG MODE select
607 TCG REGENE
SOURCE select
608 TCG/UBG
REGENE MODE
609 REC RUN/FREE
RUN select
610 VITC (SD)
611
VITC POSITION-1
select (NTSC)
A-28
Appendix
Setting Function
+/– 12H Selects whether the CTL counter operates in 12-hour
display mode or 24-hour display mode.
[24H]
+/–12H: 12-hour display mode
24H: 24-hour display mode
Note
In the ±12-hour display, the tens digit of the hours value is
dropped.
[preset] Selects the time code to which the internal time code
generator synchronizes.
regene
preset: By an operation on the front panel or by remote
auto
regene: The internal time code generator is synchronized
auto: Operates in regene mode when either assemble or
SDI-LTC If item 606 is set to "regene," this selects the source of the
synchronization of the time code generated internally.
SDI-VITC
int-LTC: When the time code played back from the time
ext-LTC
int-VITC
int-VITC: When the time code played back from the "AUX
[int-LTC]
ext-LTC: When the external time code input to the TIME
SDI-VITC: When the VITC input to the HD SDI INPUT
SDI-LTC: When the LTC input to the HD SDI INPUT
[TC UB]
Selects the regenerate signal when the time code generator
&
is in regenerate mode (when item 606. is set to regene) or
TC
during auto edit mode.
UB
TC & UB: The time code signal and user bits signal are both
TC: The time code signal is regenerated.
UB: The user bits signal is regenerated.
[free run]
This selects the way in which the time code advances.
rec run free run: Regardless of the operating mode of this unit, the
rec run: The time code advances only during recording.
Note
When using this setting, set item 606 to "preset".
[off] Selects whether or not to insert VITC data in the HD-SD
converter output.
on
off: VITC data is inserted.
on: VITC data is not inserted.
12 line When 29.97PsF/59.94i mode is selected on the VTR, this
. . .
setting specifies the lines in which the VITC signal is
[16 line] inserted.
. . .
It can be inserted in any lines from 12 to 20.
20 line
Note
Items 611 and 612 allow VITC to be inserted in two lines.
control from a device connected to the REMOTE 1-IN
(9P) connector, the initial value of the time code
generated by the internal time code generator can be
preset.
("regene") to the time code values read by the internal
time code generator.
insert mode is selected and operates in preset mode
when any other mode is selected.
code track on the tape is used.
data" in the video signal on the tape is used.
CODE IN connector is used.
connector is used.
connector is used.
regenerated.
time code advances all the time that the power is on.
(Continued)