4-6 AUDIO Menu
4-6-2 Digital Audio Output Signal
Source Track Selection (DIGOUT
EXCHNG)
To make the source track selection for the digital audio
output signal on each of channels 1 to 12, use the
following procedure.
1
Press the [F3] (DIGOUT EXCHNG) button.
The DIG OUT menu appears, together with a
source track selection window for the digital audio
output signals.
2
Carry out the source track selection for the digital
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
3
Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
Making output settings for individual channels
with the F buttons
By pressing any of the [F1] (DIGOUT CH1) to [F8]
(DIGOUT CH8) buttons in the AUDIO INPUT screen,
and in the ALT+DIG OUT screen obtained by pressing
the ALT button, the [F1](DIGOUT CH9) to [F4]
(DIGOUT CH12) buttons, you can select the source
track for each channel.
Making input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the
cursor with the channel for which you want to
make the selection.
2
Press the cursor R or r button, to select the source
track to be output.
To return to the default settings
Press the center cursor button. The cursor item returns
to the default.
4-62
Chapter 4 Menu Settings
4-6-3 Analog Audio Output
Signal Source Track Selection
(ANAOUT EXCHNG)
To make the source track selection for the analog
audio output signal on each of channels 1 to 4, use the
following procedure.
1
Press the [F4] (ANAOUT EXCHNG) button.
The ANA OUT menu appears, together with a
source track selection window for the analog audio
output signals.
2
Carry out the source track selection for the analog
audio output signal on each channel.
TR1 to TR12: Select the audio signals recorded on
tracks 1 to 12.
3
Press the [F10] (EXIT) button.
This returns to the AUDIO menu screen.
Making output settings for individual channels
with the F buttons
By pressing any of the [F1] (ANAOUT CH1) to [F4]
(ANAOUT CH4) buttons, you can select the source
track for each channel.
Making input signal selections for individual
channels with the numeric buttons
1
Press the cursor T or t button, to align the
cursor with the channel for which you want to
make the selection.
2
Press the cursor R or r button, to select the source
track to be output.
To return to the default settings
Press the center cursor button. The cursor item returns
to the default.