Traffic Information Page - Garmin GTX 330 Installation Manual

5.2.1 Configuration Menu Page
CONFIGURATION MENU
The JUMP TO menu page provides the capability to select a configuration mode starting page without having to step
through all of the pages. Select the desired section with the CRSR key and sequence through with the 8 and 9 keys.
Jump to the selection by pressing the CRSR key again with the desired selection highlighted.
The FUNC key steps to the next configuration page, after which the START/STOP key reverses until stopping at the
Menu page.
Selection
DIAGNOSTICS
DISPLAY/AUDIO
I/O CONFIG
ACFT CONFIG
5.2.2 AUDIO MODE Pages
AUDIO MODE
Selection
VOICE (MALE FEMALE)
VOLUME
MESSAGE (0-9)
ALTITUDE MONITOR
COUNT DOWN TIMER
DISABLE
MESSAGE
Message "0" is an on-off beeping tone. Message "1" through "5" are selected tones messages.

5.2.3 TRAFFIC INFORMATION PAGE

TRAFFIC MESSAGES
Sets the Traffic Messages to tone, Message or Off. Traffic Information Services (TIS) provides notification of close
proximity traffic.
GTX 330 Installation Manual
190-00207-02
Description
Jumps to Gray Code Input page.
Jumps to Audio Volume page.
Jumps to ARINC 429 INPUT #1 page.
Jumps to configuration Operation Configuration #1 page.
Description
Sets the voice to male or female. Default is male voice.
Volume is adjusted from 0 (default) to maximum with the 8 or 9 key.
Selected tones and messages.
Off, tone or message.
Off, tone or message.
Messages either enabled or disabled.
CONFIGURATION MENU Page
AUDIO MODE (First) Page
AUDIO MODE (Second) Page
TRAFFIC INFORMATION Page
Page 5-5
Rev. 1