Switching Between Two Channels Using Surflock; Selecting The Picture Size - Toshiba 26AV52U Owner's Manual

Chapter 6: Using the TV's features
Switching between two channels using
SurfLock™
The SurfLock™ feature temporarily "memorizes" one channel
to the
CH~TN
button, so you can return to that channel quickly
from any other channel by pressing
COTN.
To memorize a
channel to the
CH~TN
button:
1
Tune the TV to the channel you want to program into the
CH~TN
button.
2
Press and hold
CH~TN
for about 2 seconds until the message
"Memorized" appears on-screen. The channel has been
programmed to the
CH~TN
button.
3
You can then change channels repeatedly, and when you
press
CH~TN,
the memorized channel will be tuned.
The TV will return to the memorized channel one time only.
Once you press
CH~TN
and then change channels again, the CH
RTNmemory will be cleared and the button will function as
Channel Return, by switching back and forth between the
last two channels that are tuned.This feature also works for
external inputs.
I
38
Selecting the picture size
You can view many program formats in a variety of picture
sizes-Natural,
TheaterWide 1, TheaterWide 2, TheaterWide 3,
Full, 4:3 HD, Native, and Dot by Dot
(available in PC Mode Only).
, Note: The "picture size" illustrations are examples only The
format of the image (in any of the picture sizes) will vary
depending on the format of the signal you are currently
watching. Select the picture size that displays the current
program the way that looks best to you.
You can save separate picture size preferences for each input
on yourTY.
To select the picture size using the remote control:
I
1
Press
p,c25IZE
on the remote control.
2
While the
Picture Size
screen is open, you can do one of
the following to select the desired picture size:
• Repeatedly press
p,c25IZE.
• Press the corresponding Number button
(0-6)
while the
Picture Size
screen is open.
• Press'" or ... while the
Picture Size
screen is open.
To select the picture size using the menus:
1
Select
Picture Size
in the
Theater Settings
menu.
2
Press
~
or
~
to select the desired picture size setting.
3
Highlight
Done
and press
@.
Note: Some of the picture sizes may not be available
depending on the receiving signal format (those will be
"grayed out" in the Picture Size screen).
Using these functions to change the picture size (i.e.,
changing the height! width ratio) for any purpose other than
your private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
Note: If you select one of the TheaterWide® picture sizes, the
top and bottom edges of the picture (including subtitles or
captions) may be hidden. To view the hidden edges, either
I
scroll the picture (TheaterWide 2 and 3 only) or try viewing
the program in Full or Natural picture size.