Connecting A Vcr And Antenna Or Cable Tv (No Cable Box) - Toshiba 26AV52U Owner's Manual

Chapter 2: CDnnectlng yDur TV
Connecting a VCR and antenna or Cable TV (no Cable box)
From Cable TV or antenna
TV back panel
You will need:
• coaxial cables
• standard NY cables
- For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) instead of
the standard video cable. 00 not connect both types of
video cable to VIDEO 1 at the same time or the picture
performance will be unacceptable.
- If you have
a
mono VCR, connect UMONO on the TV
to your VCR's audio out terminal using the white audio
cable only
To view the antenna or Cable signal:
Select the ANT/CABLE video input source on the TV. *
To view the VCR:
Tum ON the VCR. Select the VIDEO 1 video input source on
the TV.*
*
To select the video input source, press INPUT on the remote control
(~
page 21). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability.