Catv Control - JVC RX-664VBK Instructions Manual

To change the transmittable signals for operating a CATV
converter or satellite tuner
1. Press and hold CATV/SAT (in the POWER section).
2. Press CATV CONTROL.
3. Enter manufacturer's code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
4. Release CATV/SAT (in the POWER section).
Following button can be used for operating the CATV
converter or the satellite tuner:
CATV/SAT (in the POWER Turns on and off the CATV
section)
After pressing CATV CONTROL, you can perform the
following operations on the equipment:
CH +/–
1 – 9, 0, 100+ (+10)
RETURN
5. Try to operate your CATV converter or satellite
tuner by pressing CATV/SAT (in the POWER
section).
When your CATV converter or satellite tuner turns on or off, you have entered the
correct code.
If there are more than one code listed for your brand of CATV converter or
satellite tuner, try each one until the correct one is entered.
Manufacturer
GI JERROLD
HAMLIN/REGAL
PIONEER
SCIENTIFIC ATRANTA
ZENITH
RCA
SONY
converter or satellite tuner.
Changes the channels.
Selects the channel.
100+ (+10) button will function as
the ENTER button if your
equipment requires pressing ENTER
after selecting a channel number.
Alternates between previously
selected channel and the current channel.
Codes
01, 02, 03, 04, 05,
06, 07, 08
15, 16, 17, 18
13, 14
09, 10
11, 12
19
20
POWER
CATV/SAT TV VCR AUDIO
CATV SOUND
CONTROL CD-DISC
CONTROL
DAP MODE 3D-PHONIC SURROUND
1 2 3
EFFECT DELAY TEST
4 5 6
SEA MODE SEA PRESET MENU
7/P 8 9
100+ RETURN/ENTER
– REAR•R +
+10 0 10
REAR TV
CENTER CH
VOLUME
(L)
SLEEP ONE TOUCH TV/VIDEO
OPERATION
CD
VCR
MUTING
VOLUME
RM-SR664U
REMOTE CONTROL
Manufacturers' codes are
subject to change without
notice. If they are changed,
this remote control cannot
operate the equipment.
Note:
Refer to the manual supplied with
your CATV converter or satellite
tuner.
46