JVC RX-664VBK Instructions Manual page 42

Using the DVD MULTI Playback Mode
6. Press Control % % % % % / fi fi fi fi fi until "–REAR L+" appears on
the display.
7. Press Control @ @ @ @ @ / # # # # # to adjust the left rear speaker
output level.
Pressing Control @ decreases the output level up to
•
–10 dB.
Pressing Control # increases the output level up to
•
+10 dB.
8. Press Control % % % % % / fi fi fi fi fi until "–REAR R+" appears on
the display.
9. Press Control @ @ @ @ @ / # # # # # to adjust the right rear speaker
output level.
Pressing Control @ decreases the output level up to
•
–10 dB.
Pressing Control # increases the output level up to
•
+10 dB.
From the remote control:
1. Press DVD MULTI until "DVD MULTI" appears on
the display.
2. Select the analog discrete output mode on the DVD
player, and start playing a DVD.
Refer to the manual supplied with the DVD player.
If you want to make any adjustment, go to the following steps.
3. Press CENTER +/– to adjust the center speaker
output level.
• Pressing CENTER – decreases the output level up to –10 dB.
• Pressing CENTER + increases the output level up to +10 dB.
4. Press REAR (L) +/– to adjust the left rear speaker
output level.
• Pressing REAR (L) – decreases the output level up to –10 dB.
• Pressing REAR (L) + increases the output level up to +10 dB.
5. Press SOUND CONTROL, then press REAR•R +/–
to adjust the right rear speaker output level.
• Pressing REAR•R – decreases the output level up to –10 dB.
• Pressing REAR•R + increases the output level up to +10 dB.
39
CENTER
REAR
(L)
SOUND
CONTROL
100+
– REAR•R +
0
+10