Operating Other Manufacturers' Video Equipment - JVC RX-664VBK Instructions Manual

Operating Other Manufacturers' Video Equipment

This remote control supplied with the receiver can transmit control signals for other
manufacturers' VCRs, TVs, CATV converters and satellite tuners. By changing the
transmittable signals from preset ones to the other manufacturers', you can operate the
other manufacturer's components using this remote control.
When operating the other manufacturers' components, refer also to the manuals
supplied with them. To operate these components with the remote control, first you need
to set the manufacturer's code each for VCR, TV, CATV converters, and satellite tuner.
To change the transmittable signals for operating another
manufacturer's TV
1. Press and hold TV (in the POWER section).
2. Press TV SOUND.
3. Enter manufacturer's code (two digits) using buttons
1–9, and 0.
See the list below to find the code.
4. Release TV in the POWER section.
The following buttons can be used for operating the TV:
TV
(in the POWER section)
TV VOLUME +/–
TV/VIDEO
After pressing TV SOUND, you can perform the
following operations on the TV:
CH +/–
1 – 9, 0, 100+ (+10)
RETURN
5. Try to operate your TV by pressing TV in the POWER section.
When your TV turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of TV, try each one until
the correct one is entered.
Manufacturer Code
HITACHI 10
JVC 01
MAGNAVOX 02
MITSUBISHI 03
PANASONIC 04, 11
RCA 05
45
Turns on and off the TV.
Adjusts the volume.
Sets the input mode (either TV
or VIDEO).
Changes the channels.
Selects the TV channels.
100+ (+10) button will function as
the ENTER button if your
TV requires pressing ENTER
after selecting a channel number.
Alternates between the previously
selected channel and the current channel.
Manufacturer Code
SAMSUNG 12
SANYO 13
SHARP 06
SONY 07
TOSHIBA 08
ZENITH 09
POWER
CATV/SAT TV VCR AUDIO
CATV SOUND
CONTROL CD-DISC
CONTROL
DAP MODE 3D-PHONIC SURROUND
2
1 3
EFFECT DELAY TEST
4 5 6
SEA MODE SEA PRESET MENU
7/P 8 9
100+ RETURN/ENTER
– REAR•R +
+10 0 10
REAR TV
CENTER CH
(L) VOLUME
SLEEP ONE TOUCH TV/VIDEO
OPERATION
CD
VCR
MUTING
VOLUME
RM-SR664U
REMOTE CONTROL
Manufacturers' codes are
subject to change without
notice. If they are changed,
this remote control cannot
operate the equipment.
Note:
Refer to the manual supplied with
your TV.