Table of Contents
Advertisement
Basic Operations
The following operations are commonly used when you play any sound source.
Turning the Power On and Off
On the front panel:
To turn on the power, press POWER.
The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.
MUTE TUNED
AUTO STEREO PRO LOGIC 3CH LOGIC
DAP
CH-
Current source name appears
To turn off the power, press POWER again.
The STANDBY lamp lights up.
From the remote control:
To turn on the power, press AUDIO.
The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.
To turn off the power, press AUDIO again.
The STANDBY lamp lights up.
Selecting the Source to Play
On the front panel:
1. Press SOURCE so that the Control % % % % % / fi fi fi fi fi buttons
work for selecting the source.
The lamp above the button lights up.
2. Press Control % % % % % / fi fi fi fi fi until the source name you want
appears on the display.
From the remote control:
Press one of the source buttons directly.
TUNER/BAND* Listen to the radio.
Each time you press the button, the band
alternates between FM and AM.
CD*
Listen to the CD player.
TAPE*
Listen to the cassette deck.
TV SOUND
Listen to TV sounds.
VCR
View the playback picture from the VCR.
DVD
Play back a stereo digital video disc.
PHONO*
Listen to a record.
DVD MULTI
Play back a digital video disc using the
analog discrete output mode (5.1 CH
reproduction) on the DVD player.
L
SLEEP SEA
3D-PHONIC
HALL
LOUDNESS
VOLUME
MHz
kHz
Current volume
level is shown here
VOLUME
R
STANDBY
POWER
AUDIO
SOURCE
CD
VCR
Notes:
• When you press one of the
source buttons on the remote
control marked with an asterisk
(*), the receiver automatically
turns on.
• When connecting this receiver
and the DVD player by using
the AV COMPU LINK cable,
"DVD MULTI" is always
selected when you start playing
a disc of 5.1 ch surround. You
can change it to "DVD" after
playback starts.
14
Hide quick links:
Advertisement
Table of Contents
