3.28 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDE series only)
3.28 [1-1] Slot—Port Property - CSI/F Port—
Connection Command (KX-TDE series only)
Commands for the CSIF ports can be programmed.
INS
Puts the Cell Station (CS) in service.
Value Range
Not applicable.
Maintenance Console Location
3.28 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDE series only)
Programming Manual References
3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)
Feature Guide References
None
OUS
Takes the CS out of service. This enables a temporary non-use of the CS, for example, for the purpose of
repair.
Value Range
Not applicable.
Maintenance Console Location
3.28 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDE series only)
Programming Manual References
3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)
Feature Guide References
None
248
PC Programming Manual