Paging Deny; Display Lock / Svm Lock - Panasonic KX-NCP500 Programming Manual

ICM Tone
Selects the ring tone for incoming calls arriving at the INTERCOM button or PDN buttons. Note that the ring
tone specified here is applied to all PDN buttons on an extension.
Value Range
KX-DT300 series (except KX-DT321)/KX-T7600 series (except KX-T7665)/IP-PT (except KX-NT265/
KX-NT321): 1–30
KX-DT321/KX-T7665/KX-NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
None

Display Lock / SVM Lock

Locks or unlocks the Incoming Call Log and Simplified Voice Message Log display (i.e., specifies whether
other extension users can see the Incoming Call Log and SVM Log information at the extension).
Value Range
Unlock, Lock
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.18.2 Incoming Call Log
1.17.7 Built-in Simplified Voice Message (SVM)

Paging Deny

Specifies whether paging of the extension from other extensions is enabled.
Value Range
Disable, Enable
6.1 [4-1-1] Wired Extension—Extension Settings
PC Programming Manual 699