Panasonic KX-NCP500 Programming Manual page 577

Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Send CLIP of CO Caller—when call is forwarded to CO
Selects whether the CLIP number of the calling party or the CLIP number of the forwarding extension or virtual
PS is sent to the forwarding destination to identify the origin of a trunk call.
Value Range
Disable: The CLIP number assigned to the forwarding extension or virtual PS is sent.
Enable: The CLIP number of the calling party is sent.
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.2.2.3 Outside Destinations in Incoming Call Distribution Group
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
1.30.6 Network ICD Group
Send CLIP of Extension Caller—when call is forwarded to CO
Selects whether the CLIP number of the calling extension or the CLIP number of the forwarding extension or
virtual PS is sent to the forwarding destination to identify the origin of a call.
Value Range
Disable: The CLIP number assigned to the forwarding extension or virtual PS is sent.
Enable: The CLIP number of the calling extension is sent.
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
4.18 [2-9] System Options
PC Programming Manual 577