3-5-2] Incoming Call Distribution Group-Queuing Time Table - Panasonic KX-NCP500 Programming Manual

5.15 [3-5-2] Incoming Call Distribution Group—Queuing Time Table
5.15 [3-5-2] Incoming Call Distribution Group—
Queuing Time Table
A Queuing Time Table can contain up to 16 sequences which control how calls waiting in a queue are handled.
A maximum of 64 (with the KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200) or 128 (with the
KX-TDE600) Queuing Time Tables can be programmed.
Queuing Sequence—Sequence 01–16
Specifies the command activated by the corresponding sequence.
Value Range
None: Redirects the call to the next sequence.
Overflow: Redirects the call to the overflow destination when there is no answer.
Disconnect: Disconnects the line.
Sequence 01–16: Redirects the call to a different sequence.
Wait 5 ´ n (n=1–16) s: If preceded by an OGM, plays the Music on Hold for the specified period of time; if not
preceded by an OGM, sends a ringback tone for the specified period of time.
OGM 01–64: Sends a certain OGM.
Maintenance Console Location
5.15 [3-5-2] Incoming Call Distribution Group—Queuing Time Table
Programming Manual References
None
Feature Guide References
1.2.2.4 Queuing Feature
1.2.2.6 Overflow Feature
1.13.4 Music on Hold
1.17.5 Outgoing Message (OGM)
642 PC Programming Manual