1-1] Slot-Port Property - Csi/F Port-Connection Command (Kx-Tda100/ Kx-Tda200/Kx-Tda600 Only) - Panasonic KX-TDA100 Programming Manual

3.9 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.9 [1-1] Slot—Port Property - CSI/F Port—
Connection Command (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Commands for the CSIF ports can be programmed.
INS
Puts the Cell Station (CS) in service.
Value Range
Not applicable.
Maintenance Console Location
3.9 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
3.8 [1-1] Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
OUS
Takes the CS out of service. This enables a temporary non-use of the CS, for example, for the purpose of
repair.
Value Range
Not applicable.
Maintenance Console Location
3.9 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
3.8 [1-1] Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Guide References
None
PC Programming Manual 131