Key Functions - Brother 882-W20/W22 Operation Manual

■ Key Functions

No. Display
a
Utility stitch key
b
Character/Decorative
stitch key
c
Image key
d Free motion mode
key
e Mirror image key
f Needle mode
selection key (single/
double)
g Back to beginning key When sewing is stopped, press this key to return to the beginning of the stitch.
h Single/Repeat sewing
key
i Sensor function key
j
Edge sewing key
k Retrieve key
l
Manual memory key
m
Reset key
n
Thread tension key
o
"L/R Shift" key
u
t
s
r
q
p
Key Name
Press this key to select a straight stitch, zigzag stitch, buttonhole, blind hem
stitch, or other stitches commonly used in garment construction.
Press this key to select character or decorative stitch patterns.
Press this key to display an enlarged image of the selected stitch pattern.
Press this key to enter free motion sewing mode.
The presser foot is raised to an appropriate height and the feed dog is lowered
for free motion quilting.
Press this key to create a mirror image of the selected stitch pattern. If the key
display is light gray, a mirror image of the selected stitch pattern cannot be
sewn.
Press this key to select twin needle sewing mode. The sewing mode changes
between single needle mode and twin needle mode each time you press the
key. If the key display is light gray, the selected stitch pattern cannot be sewn
in the twin needle mode.
Press this key to choose single stitches or continuous stitches.
Press this key to use the sensor function.
Using the built-in camera, press this key to measure the width of the area from
the edge of the fabric to the stitch and set the camera for edge sewing.
Press this key to retrieve a saved pattern.
Change the stitch pattern settings (zigzag width and stitch length, thread
tension, automatic thread cutting or automatic reinforcement stitching, etc.),
then save them by pressing this key. Five sets of settings can be saved for a
single stitch pattern.
Press this key to return the selected stitch pattern saved settings to the default
settings.
Shows the automatic thread tension setting of the currently selected stitch
pattern. You can use the plus and minus keys to change the thread tension
settings.
Press to shift the stitch pattern to the right or press
to the left. This feature is not available for all patterns. Only those applicable
will be shifted. The machine default setting is highlighted.
a b c
d
e
f
g
h
i
j
k
l
m
o n
Explanation
SELECTING UTILITY STITCHES
90-92
to shift the pattern
3
Page
113
170
114
133
113
65
114
114
100
162
115
115
92
91
111