Brother 882-W20/W22 Operation Manual page 354

MY DESIGN CENTER WITH SCAN
→ The image display screen appears.
b
Set a picture to the scanning frame and
attach to the machine. Refer to "Using the
Scan Frame" on page 350.
c
Press .
Note
• When scanning starts, some of the machine
lights will turn off in a certain
circumstances, in order to increase the
scan quality. The machine lights will return
to their original brightness when scanning
ends.
• You can import an image of 5 MB or smaller
from USB media or a computer.
→ When the following message appears, press
→ Scanning begins.
* To stop scanning and return to the screen in
c
step , press
352
.
.
d
When scanning is finished, scanned image is
displayed in dim in the pattern drawing
area.
e
Trace the background image. Refer to
"PATTERN DRAWING SCREEN" on
page 340 about creating your pattern.
a
a Transparency adjustment
* Press or to adjust the transparency of the
background.
Each press of lightens the background, making
the line pattern darker. Each press of
background, making the line pattern lighter.
f
After editing the pattern, follow the
procedure from "After Editing the Design"
on page 346.
darkens the