Installation - Kidde i12060CA Manuals

Installation

This unit is suitable as a Single Station and/or Multiple
Station alarm (interconnects with up to 24 devices), and
has a five-year limited warranty.
IMPORTANT: This unit is only approved to interconnect with the Kidde
line of products. It is not approved to interconnect with any other
manufacturer's products.
This alarm is interconnect compatible with the following
alarms and accessories:
Smoke alarms: 1235CA, 1275CA, 1276CA, i12020CA,
i12040CA, i12060CA, PE120CA, PI2000CA
Smoke/CO alarms: KN-COSM-IBCA, KN-COSM-ICA
CO alarms: KN-COB-ICB-CA, KN-COB-IC-CA, KN-COP-IC-CA
Relay modules: 120X, SM120X, CO120X
Heat alarm: HD135FCA
Strobe Light: SL177I
Refer to respective manuals for specific application
information.
This product is designed to detect products of combustion
using the ionization technique. It contains 0.9 microcurie
of Americium 241, a radioactive material. Distributed under
U.S. NRC License No. 32-23858-01E. Manufactured in
compliance with U.S. NRC safety criteria in 10 CFR 32.27.
The purchaser is exempt from any regulatory
requirements.
This smoke alarm uses an extremely small amount of
radioactive element in the ionization sensor chamber. Do
not try to repair the smoke alarm yourself. Refer to the
instructions in Warranty for service.
WARNING! Removal of the smoke alarm battery and disconnecting or loss
of AC power will render the smoke alarm inoperative.
ELECTRICAL RATING: 120 V AC, 60 HZ, 80 mA maximum
per alarm (maximum 80 mA for originating unit with 24
devices interconnected).
IMPORTANT! Read all instructions before installation and keep this
manual near the alarm for future reference.
2