Kidde I12020 Specifications

120V AC Wire-In Smoke Alarm
For Basic Use
Part# 21006374
– Ionization Sensing Technology
– One button design (operates Smart Hush™ and test)
– Large mounting base
– Tamper resist feature
– Alarm memory
– Pre-stripped wiring harness with tinned strands
Description
The Kidde i12020 is an AC powered, ionization
smoke alarm that operates on a 120V power source.
This alarm uses ionization sensing technology. Ionization
sensing alarms may detect invisible fire particles
(associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible
particles (associated with smoldering fires) sooner than
ionization alarms.
Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to help
insure maximum detection of the various types of fire
that can occur within the home.
The i12020 includes a quick connect wiring harness
for easy installation. This unit is available in a 6-piece
cut case with tray for easy display. The i12020 is a UL
Listed product with a 10-year limited warranty.
Model i12020
SIGNALING
U L
LISTED
Install Confidence:
Easy Installation
• Large mounting base makes mounting easier, protects
surface paint from dirt and covers imperfections.
• Pre-stripped wiring harness with easy off cap does
not require stripper tool. Tinned strands increase
conductivity and wire nut grip.
Fewer Callbacks
• One button design for easy operation and less
confusion. Operates Smart Hush™ and alarm test.
• Dust cover protects sensor from contaminates during
construction reducing nuisance alarms.
User-Friendly Features
• Tamper resist locking feature deters alarm theft.
• Alarm memory flashes red LED indicating which unit
was the initiating alarm in interconnected system.
• Interconnectable with up to 24 devices (of which 18
can be initiating) including smoke, CO and heat alarms.
See user's guide for complete instructions.