Table of Contents
Advertisement
Using the LAN MAC EEPROM Utility
You can use the MAC.BAT utility to write the MAC.CFG file to the EEPROM under DOS mode.
1.
Use a text editor (for example: Notepad) to open the MAC.CFG file. You can see the MAC.CFG contents
as below:
2.
In DOS mode, run the MAC.BAT file to write MAC values to eeprom.
Chapter 2
WriteData = '001122334455'
StartAddr=7A
WriteLeng=6
KeepByte=0
MAC value
MAC address
MAC value length
don't care
47
Advertisement
Table of Contents
