Storing Your Own Sound Adjustments - JVC KD-S670 Instructions Manual

Storing your own sound adjustments

You can adjust the sound modes (BEAT, SOFT, POP: see page 15) to your preference and
store your own adjustments in memory.
3
1
Within
5 seconds
2
5 seconds
3
Within
5 seconds
4
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 15.
18
2
2
Call up the sound mode you want to adjust.
See page 15 for details.
To adjust the bass or treble sound level
Select "BAS" or "TRE."
To turn on or off the loudness function
Each time you press LOUD, the loudness
function turns on and off alternatively. (= go to step 4)
Within
Adjust the bass or treble level.
See page 13 for details.
Press and hold SCM until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
1, 4