Timer Operations; Setting The Timer - JVC UX-G28 Instructions Manual

Remote control
TIMER
4/¢
Main unit
%
4
/¢
17

Timer Operations

Setting the Timer

Using Timer, you can wake up with music, etc.
• You can set the Timer when the System turns on.
• To exit from the timer setting, press 7 as required.
How Timer actually works
Once the Timer has been set, the timer (
lights on the display. Lights TIMER lamp on the main
unit. Timer is activated at the same time everyday until
the timer is turned off manually.
When the on-time comes
The System turns on, tunes in to the specified station or
STOP 7
starts playing the specified source.
• The sound level is gradually turned up until the last
time you listened to. (Maximum Vol.16)
• While Timer is working, the timer (
lights on the display.
• The timer setting remains in memory until you change it.
• Without canceling the Timer, you can change the
source or adjust the volume after Timer starts playback.
1
To activate the TIMER setting
2
Set On Time
1 Set hour
TIMER
2 Set minutes
STOP 7
2
sec.
TIMER
MHz
PRESE
PRESE
) indicator
) indicator
TIMER
IMER
IMER