Daily Operations—Sound & Other Adjustments; Additional Information; Learning More About This System - JVC UX-G28 Instructions Manual

Learning More about This System

Daily Operations—Playback
Listening to the Radio:
• If you store a new station into an occupied preset number, the
previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If this
happens, preset the stations again.
Playing Back a Disc:
• This System cannot play "packet write" discs.
• For MP3/WMA playback...
– MP3/WMA discs are required a longer readout time than
regular CDs. (It depends on the complexity of the group/file
configuration.)
– Some MP3/WMA files cannot be played back and will be
skipped. This results from their recording processes and
conditions.
– When making MP3/WMA discs, use ISO 9660 Level 1 or
Level 2 for the disc format.
– This System can play back MP3/WMA files with the
extension code <.mp3/.wma> (regardless of the letter
case—upper/lower).
– Some characters or symbols will not be shown correctly on
the display.
The maximum character number shown on the display is 32
(without the extension code) for files, and 30 for ID3 tag.
– It is recommended that you make each MP3/WMA file at a
sampling rate of 44.1 kHz and at bit rate of 128 kbps.
– This System can recognize a total of 999 tracks and 500
groups on an MP3/WMA disc. Those exceeding the
maximum number cannot be recognized.
– Playback order of MP3/WMA tracks may be different from
the one you have intended while recording. If a folder does
not include MP3/WMA tracks, they are ignored.
MP3/WMA groups/tracks configuration
This System plays backMP3/WMA tracks as follows.
The play order in the figure is for MP3/WMA tracks on
the disc.
MP3/WMA tracks on USB mass storage class device
maybe played back differently.
Hierarchy
Level 1 Level 2 Level 3
01
ROOT
02
1
2
01 Group with its play order
MP3/WMA track with its play
1
order
19

Additional Information

(see pages 8)
Level 4 Level 5
9
03 04
10
3 7
4
8
5
05 11
6
12
Daily Operations—Sound & Other Adjustments
(see pages 12 and 13)
Adjusting the Volume:
• Be sure to turn down the volume before connecting or putting
the headphones.
Adjusting the Sound:
• This function also affects the sound through the headphones.
Setting the Clock:
• The clock blinks on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Advanced Disc/USB mass storage class device
(see pages 14 to 16)
Programming the Playing Order—Program Play:
• If you try to program a 33rd track, "FULL" appears on the
display.
• While programming steps...
Your entry will be ignored if you have tried to program an item
number that does not exist on the disc (for example, selecting
track 14 on a disc that only has 12 tracks).
Timer Operations
(see pages 17 and 18)
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the clock
first, then the timer again.
• You can not set On time and Off time on the same time setting.