Playing Back A Disc; Playing Back From The Usb Mass Storage Class Device - JVC UX-G28 Instructions Manual

Playable media and files
This system can playback following types of media and files.
Media Audio CD, CD-R/RW, USB mass
storage class device
File format MP3, WMA
Audio CD CD-R
• This system may not playback some files even though
their formats are listed above.
• Caution for DualDisc playback
The Non-DVD side of a "DualDisc" does not comply
with the "Compact Disc Digital Audio" standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.

Playing Back a Disc

Main Unit
ONLY
To insert a disc
You can insert discs while playing another source.
To start: To pause:
CD
To release, press again.
CD-RW
To stop:
CD STOP

Playing Back from the USB mass storage class device

This System is equipped with a USB MEMORY terminal on
the front panel. You can connect a USB mass storage class
device such as a USB flash memory device, Digital Audio
Player (DAP) to this System. This System cannot recognize
a USB mass storage class device whose rating exceeds 5V/
500mA.
IMPORTANT
• You cannot send any data to your USB mass storage
class device from this System.
• You cannot connect a computer to the USB MEMORY
terminal of the system.
• Always set volume to "VOL MIN" when connecting or
disconnecting the other equipment.
• Connect the USB mass stotrage class device directly to
the system. Using a USB hub may result in malfunction.
• Coded or encrypted tracks in a special method cannot be
played on the unit.
• The USB mass storage device's battery is charged while
the System is turned on.
To connect the USB mass storage class device
When connecting a USB mass storage class device, refer
also to its manual.
DAP
• When disconnecting the USB mass storage class device,
make sure that the System is in the stop condition.
To play back sounds on the USB mass storage
class device
To start: To pause:
USB
MEMORY MEMORY
• The USB indicator on the display lights while USB
MEMORY is selected.
or
To stop:
USB
STOP
10