Table of Contents
Advertisement
Connections
This section describes about the connections with the other audio equipments.
* Connect the AC power cord last. Make sure power is off.
¢ Fully insert cable connectors into jacks. Loose connections may cause hum or
noise.
¢ The red jacks are for the right-channel (R) connections and the white jacks are for
the left-channel (L).
Connecting to Your System
Connecting to the GRAPHIC EQ jacks of the amplifier
GOO
OOOO
G|QjOO
Q|OQ|Q|O_G|QlOo@
4
OOO
22.9)
Amplifier
LINE IN
AC OUTLET
SEQ-711
aaj to an AC outlet of
the amplifier or a
wall outlet
TAPE RECORDER
REC OUT
TAPE RECORDER
IN
Cassette deck
LINE IN
Ss
Cume our)
If your unit is supplied with an AC plug adaptor
AC OUTLET (UNSWITCHED)
Use it to connect the unit to a wall outlet. When making
Use this outlet to power audio component whose power
power connections among the Sony component, this
consumption is less than the wattage indicated on the AC
adaptor is not needed.
ouilets. The outlet is not controlled by the POWER switch on
the front panel.
Note
When SEQ-711
is connected to the system, always keep the
CAUTION
power on, even when the sound is not to be equalized.
If
Do not connect any electrical home appliances such as an
the power is off, the sound does not come out.
electric iron, fan, TV or other high wattage equipment to
these AC outlets.
Advertisement
Table of Contents
