Sharp LC-32X20E Service Manual page 103

Ref No.
AF3
AF2
AF1
AG1
AG2
AG3
AG4
AG5
AH5
AH4
AH3
AH2
AH1
AJ1
AJ2
Power and ground pins
A26, AJ20, Y6
AA13, AA22, AB13, AB14,
AB21, AB22, AD6, AE6,
AF6, AG6, AH6, AJ8, AJ9,
AJ10, AJ11, AJ12, AJ16,
AJ17, AJ18, AJ19, AK11,
AK12, AL11, AL12, AM12,
AN12, AP12, E7, E8, F6, F7,
F8, F9, G6, H6, J6, N13,
N14, N21, N22, P13, P22,
T6, U6, V6, W6
A28, B28, C28, C29, D28,
D29, E27, E28, F16, F17,
F18, F19, F23, F24, F25,
F26, F27, F28, K6, L 6, M6
AE31, AM31, C31, L31
AA29, AA30, AA31, AA32,
AA33, AA34, AD29, AD30,
AE29, AE30, AH29, AH30,
AH31, AJ27, AJ28, AK27,
AK28, AL27, AL28, AM27,
AM28, AM29, AN27, AN28,
AP27, AP28, G29, G30,
G31, K29, K30, L29, L30,
V31, V32, W29, Y29, Y30
Pin Name I/O
GP14 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: VS1, the second POD interface voltage sense.
GP13 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: VPP_EN#, the second POD interface slot VPP enable.
GP12 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: VPP_EN, the second POD interface slot VPP enable.
GP11 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: VCC_EN#, the second POD interface slot VCC enable.
GP10 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: VCC_EN, the second POD interface slot VCC enable.
GP9 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: WAIT#, WAIT# signal to expend bus cycle.
GP8 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: Ready and IREQ.
GP7 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: SI2C1_SDA, I2C bus SDA.
GP6 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: SI2C1_SCL, I2C bus SCL.
GP5 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: SI2C1_DEVID, I2C bus DEVID.
GP4 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: SI2C2_SDA, I2C bus SDA.
GP3 I/O Program IO.
PWM: Pulse-Width Modulation.
GP2 I/O Program IO.
PWM: Pulse-Width Modulation.
GP1 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: SI2C2_SCL, I2C bus SCL.
GP0 I/O Program IO.
PWM: Pulse-Width Modulation.
POD: SI2C2_DEVID, I2C bus DEVID.
V5SF — 5V safe power.
VDDC — Core power supply= 1.2V
VDDF — Power supply= 3.3V
VDDI33 — 3.3V power for DDR IO input buffer.
VDDM — 2.5V supply ring for memory interface (Long PAD).
LC-32X20E/S/RU, LC-37X20E/S/RU
Pin Function
5 – 31