Changing The Display Brightness; Changing The Scanning Mode; Changing The Picture Tone - JVC SP-UXG70 Instructions Manual

Micro component system
Hide thumbs Also See for SP-UXG70:
Table of Contents

Advertisement

Changing the Display Brightness

You can dim the display window.
TV/VIDEO
DIMMER OFF
DIMMER
(Canceled)
DIMMER ON Dims the display.
AUTO DIM*
Removes the display illumination when
starting playback a disc with a video
source.
• The display illuminates when playback
stops.
* "AUTO DIM" does not work for CD/MP3/WMA.

Changing the Scanning Mode

This System supports progressive scanning.
Select the video signal mode according to the type of your
TV. If you connect a progressive TV through the VIDEO
OUT jacks, you can enjoy a high quality picture from the
built-in DVD player by selecting "PROGRE."
SCAN MODE
7
(while holding...)
ENTER/SET
RGB
For a conventional TV.
Select to send the composite video
signals or RGB signals through the
SCART terminal.
Y/C
For a conventional TV.
Select to send S-Video signals
through the SCART terminal.
PROGRE
For a progressive TV.
Select to enjoy a progressive scanned
picture through the Video
Component out terminal.
• The PRGR. indicator lights up.
14
DIMMER ON
AUTO DIM
Remote
INFO
ONLY
RGB
Y/C
PROGRE

Changing the Picture Tone

• While showing a playback picture on the TV, you can
select a preset picture tone, or adjust it and store your own
taste.
To select a preset picture tone
1
While playing, display VFP setting screen.
VFP
8
(while holding...)
2
Select a preset picture tone.
PTY
PTY
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings.
To remove the screen, press VFP again while holding
SHIFT, or wait for more than 5 seconds.
To adjust the picture tone
1
Select "USER1" or "USER2."
• Follow steps 1 and 2 explained above.
2
Select a parameter you want to adjust.
TV CH
TV CH
GAMMA
Adjust if the neutral color is bright
or dark (–3 to +3).
BRIGHTNESS
Adjust if the entire picture is bright
or dark (–8 to +8).
CONTRAST
Adjust if the far and near positions
are unnatural (–7 to +7).
SATURATION
Adjust if the picture is whitish or
blackish (–7 to +7).
TINT
Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(–8 to +8).
Remote
ONLY
NORMAL
0
GAMMA
0
BRIGHTNESS
0
CONTRAST
0
SATURATION
TINT
0
SHARPNESS
0
On the TV
NORMAL
CINEMA
USER2
USER1
ENTER/SET

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ux-g70Ca-uxg70

Table of Contents