Icon Explanations - Mitsubishi Electric Mr.Slim PAR-30MAA Technical Manual

Maintenance Auto descending panel operation
Clock
Language selection
Night setback
Smooth maintenance
Refrigerant leak check
Support Contact information (Manual entry)
Model name
Serial No (Manual entry)

Icon explanations

Controller operation
Timer
The administrator password must be entered on the password input screen to change settings.
Administrator
There is no settings that can skip this process.
Service Enter administrator password
Select:
Cursor
Indicates settings that can be changed only while
the units are in operation.
ON
Indicates settings that can be changed only while
the units are operated in the Cool, Heat, or Auto
mode.
Both the main remote controller and sub remote
Main
controller can be operated.
Sub
Restrictions for the sub remote controller
Main Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor
1
Function
Timer
F1 : Press to move the cursor left.
F2 : Press to move the cursor right.
F3 : Press to decrease the value by 1.
F : Press to increase the value by 1.
*Changes cannot be made unless the correct password is entered.
The following settings cannot be made from the sub remote controller.
Make these settings from the main remote controller. "Main" is displayed
in the title of the Main menu on the main remote controller.
• Timer (On / Off timer, Auto-Off timer)
• Weekly timer
• Energy saving (Auto return, Schedule)
• Night setback
Page
• Maintenance (Manual vane angle)
PAR-30MAA
Slim
The table below summarizes the square
Service
icons used in this manual.
Indicates settings that can be changed only while
the units are not in operation.
OFF
Indicates functions that are not available when the
buttons are locked or the system is centrally control-
led.
Mr.Slim City Multi
Only Only
PAR-21MAA
City multi
Indicates set-
tings that can
be made only
from the main
remote control-
ler.
Indicates the target model (Mr. Slim air
conditioner / City Multi air conditioner)
equipped with each function.
Main