Replacing The Waste Toner Box - Brother DCP-9055CDN Basic User's Manual

Resetting the belt unit counter
When you replace a belt unit with a new one,
you need to reset the belt unit counter by
completing the following steps:
a
Press Menu, 5, 8.
b
Press a or b to select Belt Unit.
Press OK.
c
Press 1 to reset the belt unit counter.
d
Press Stop/Exit.

Replacing the waste toner box

Model name: WT-300CL
A new waste toner box can print
approximately 50,000 A4 or Letter size
single-sided pages.
WT Box End Soon
WT Box End Soon
If the LCD shows WT Box End Soon, it
means the waste toner box is near the end of
its life. Buy a new waste toner box and have
it ready before you get a Replace WT Box
message.
Replace WT Box
When the following message appears on the
LCD, you need to replace the waste toner
box:
Replace WT Box
Replace...
54
WARNING
A
DO NOT put the waste toner box into a fire.
It could explode.
Be careful not to spill the toner. DO NOT
inhale or allow it to get into your eyes.
IMPORTANT
DO NOT reuse the waste toner box.
A
a
Make sure that the machine is turned
on.
A
A