Lubrication - DURKOPP ADLER M-type 867 Instruction Manual

10.2 Lubrication

Maintenance work
to be carried out
Lubrication of the machine
head
Caution: danger of injury
Oil can cause skin eruptions.
Avoid protracted contact with the skin.
In the event of contact, thoroughly wash the affected area.
CAUTION:
The handling and disposal of mineral oils is subject to legal regulation.
Deliver used oil to an authorised collection point.
Protect your environment.
Take care not to spill oil.
To lubricate the special sewing machine use only DA 10 lubricating oil
or an equivalent oil of the following specification:
–
Viscosity at 40° C:
–
Flashpoint:
DA 10 is available from DÜRKOPP ADLER AG retail outlets under the
following part numbers:
250-ml container:
1-liter container:
2-liter container:
5-liter container:
Explanation
The machine head is fitted with a central
oil-wick lubrication system.
The bearings are supplied out of oil
reservoir 1.
- The oil level must not fall below the
marking line 3 (MIN) of the oil reservoir.
If the oil level falls below the marking
line 3, the oil reservoir will be lit (only
the CLASSIC version).
- Fill in oil through the bore hole 2 up to the
marking line "Max".
Keystone Sewing Machine Company, Inc.
1
10 mm²/s
150° C
9047 000011
9047 000012
9047 000013
9047 000014
2
3
GB
Operating
hours
8
67