How To The Panel Mechanism Assembly - Kenwood KDC-M7024 Service Manual

KDC-M7024/MP822

HOW TO THE PANEL MECHANISM ASSEMBLY

1. Fixed the position of operation side
(Fixed the horizontal position when the panel opened)
q The mounting hardware (281) of operation side is rota-
tion (A) into the stop position with close side.
w As figure (B) line is just above and the gear (230) at-
tached to pin.
2. The slider assembly insert to bottom chassis
q The bracket for display panel (284) is leave down, in-
sert to the chassis (702). (C)
w The slider assembly insert to the chassis (702) after
that shift (D) direction.
e The bracket for display panel (284) is raised (E) direc-
tion.
r Keep the raising conditions, the slider assembly is shift
(F) direction.
(Note) Do not bend the knob of chassis detection switch
when the slider assembly insert.
3
A
Rotary to the
stop position
B
This line attached just above
Fig. B
(This figure from look at B arrow)
284
SW
284
SW
D
281
230
C
702
F
E
702