2 SETTING ITEMS (ADMIN)
Error messages
The following error messages may be displayed on the touch panel.
[802.1X] Auth Server/Switch couldn't be contacted
[802.1X] Authentication failed
Certificate verification Failure
214
IEEE 802.1X Authentication Setting
Message
Cause
The RADIUS server service is stopped.
Configuration for the RADIUS server is not correct.
The IEEE 802.1X switch has problem.
The username or password that the user entered is not
correct.
The certificates uploaded are wrong.
A CA certificate is not installed in the equipment.
The installed CA certificate is not valid.
The server certificate is invalid.