Setting The Ipx/Spx Protocol - Toshiba e-STUDIO5540C Management Manual

2 SETTING ITEMS (ADMIN)

Setting the IPX/SPX protocol

You can set the IPX/SPX protocol on this equipment. The IPX/SPX protocol is usually used to communicate with the
NetWare file server through the network.
1
Press [NETWORK] in the ADMIN menu (1/2).
The NETWORK menu is displayed.
To display the ADMIN menu, see the following page:
P.75 "Entering Admin Menu"
2
Press [IPX/SPX].
The IPX/SPX screen is displayed.
3
Specify the following items as required and press [OK].
ENABLE IPX/SPX — Press [ENABLE] to enable the IPX/SPX protocol, or [DISABLE] to disable the IPX/SPX
protocol.
FRAME TYPE — Press [AUTO] to automatically detect the appropriate frame type, or press another frame type
button. If you do not know the frame type that must be used, select [AUTO].
148 Setting Network Functions