Chapter 8 Tcp/Ip Settings; Lan Interface - Planet Enterprise WiFi System User Manual

802.11g wireless lan outdoor cpe ap/router
Table of Contents

Advertisement

8.1 LAN Interface

There are the IP settings of the LAN Interface for the device. These settings may be
referred to as Private settings. You may change the LAN IP address if needed. The
LAN IP address is provided to your internal network and cannot be seen on the
Internet.
You can change the LAN IP address for your requirements. The default LAN IP is
192.168.1.254. You can also enable the Secondary LAN IP function in this page. It
will allow LAN Interface to have the alias IP for management.
Parameter
IP Address
Subnet Mask
Default Gateway
DHCP

Chapter 8 TCP/IP Settings

Description
Fill in the IP address of LAN interfaces of this WLAN Access
Point.
Fill in the subnet mask of LAN interfaces of this WLAN
Access Point.
Fill in the default gateway for LAN interfaces out going data
packets.
Click to select Disabled, Client or Server in different
operation mode of wireless Access Point.
36

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wap-6200

Table of Contents