Planet Enterprise WiFi System User Manual page 25

Mode
SSID
Channel
Associated
Clients
Enable MAC
Clone
Enable Universal
Repeater mode
SSID of extended
Interface
After changing the configuration setting, please click the "Apply Changes" button to
complete the new configuration setting. Otherwise, click the "Reset" button to abort
change and recover the previous configuration setting.
WAP-6200 supports not only AP mode, but also provides Client,
WDS, AP+WDS and Repeater mode. Please refer to below for
detail wireless Basic Settings. In Default, WNRT-6200 will work
with AP mode.
The SSID (Service Set Identification) is the unique name shared
among all devices in a wireless network. The SSID must be
identical for all devices in the wireless network. Set a string up to
32 letters to identify AP.
Select the appropriate channel to correspond with your network
settings. Auto is the default setting. All devices in your wireless
network must use the same channel in order to function
correctly.
Click the "Show Active Clients" button to open Active Wireless
Client Table that shows the MAC address, transmit-packet,
receive-packet and transmission-rate for each associated wireless
client.
Take Laptop NIC MAC address as wireless client
MAC address. [Client Mode only]
Click to enable Universal Repeater Mode.
Assign SSID's name when enables Universal Repeater Mode.
25